A Quick Guide To Knife Steel for Non-Nerds

April 13, 2020 4 min read 0 Comments

A Quick Guide To Knife Steel for Non-Nerds

This guide is designed to help you pick the right knife, without needing to know everything about steel. I grew up in the ’80s and ’90s when being a nerd was not synonymous with being cool. That, coupled with the fact I’m a cook and knife user, not a steel analyzer or a fancy book-learner qualifies me to write the simple guide to steel, focusing on the functions that regularly affect the user. 

The top 3 questions we get about the steel in a knife are:

  1. Does it rust?
  2. How long does it stay sharp for?
  3. Does it chip easily? 

The short version 

If tarnish and water spots are dirty and upset you, don’t get carbon steel. The knives we sell are all really really sharp — but the carbon steel ones are sharper. Take care of them and they will all hold their edge longer. Some have a carbon steel core but have a layer of stainless on the outside, leaving only the non-stainless edge to deal with. 

The Long Version 

History

A long time ago they made steel and it was sharp and it rusted. Then a while ago they made stainless steel which wasn’t as sharp but didn’t rust. Then recently they made powdered stainless steel that is crazy sharp and doesn’t rust. The most recent innovation of powder metallurgy allows for stainless steel that can be very sharp and not rusty. 

Rust

Because rusting is in steel’s nature, it’s not a matter of how well you take care of it, it will rust. This means it’s going to oxidize and turn grey when you first use it, and the finish will change. You just can’t get around that. If you let water stay on the steel it will rust. The orange skind of rust is bad and you want to get rid of it as soon as you see it, so scrub it off. You can learn more about carbon steel care here, but essentially grey is good, orange is bad.

Why doesn’t stainless steel rust? Because of science. Keep in mind, it’s called stain-less not stain-never. This is a different kind stainless steel than regular cutlery, so no dishwasher, ever.  The Japanese knives that we import are made from stainless steel that is really sharp and better at holding an edge than European or mass-market knives, but stainless knives don't get quite as sharp as carbon steel knives. Most of the Japanese knives we carry are made of 2 outer layers of soft steel, that cover the hard core steel (which is what the edge is made from). There are some that are a combination: stainless steel on the outside and carbon steel on the inside. This gives you great edge performance, with only 5% of the exposed surface area susceptible to rust. 

Sharpness and Brittleness

All the Japanese knives we sell are exceptionally good at being sharp, much sharper than a set from Costco or the familiar European ones. The steel in a Japanese knife is harder, so it stays sharper for longer. This comes with a trade-off as it can chip, because harder materials are more brittle. Sharpness and brittleness go hand-in-hand. Any high-performance knife shouldn’t be used for bones or frozen foods, but rather food you would chew with your own teeth. Think meat, fish and vegetables. In general, regular stainless steel is less prone to chipping than carbon steel but powdered stainless is a little more sensitive than other stainless steels. If you take care of your tools, they will last longer. The same goes for your knife’s edge. Avoid using your knives as a hammer, or cutting on hard surfaces like your granite countertop.  

Decision

If you aren’t bothered by tarnish and are willing to wipe off your knife when you use it, then go for carbon steel. Not being uptight about your knife being shiny means you can have a knife that will be incredible at holding its edge, and will take on a unique look as you use it. Think of how your favourite pair of jeans or boots develop a unique look after you've broken them in. If you want exceptional sharpness and no rust, look to the powdered steel types. If you just want a very sharp knife that dependably cuts your food without any hassle, go for the regular stainless steel.


Steel Types and Names

Stainless

Carbon

Powdered stainless

Aus-8

Yellow

SG2

VG-10

White #1

R2

SLD

White #2

SRS-15

Cobalt Special

Blue #1

SRS-13

Ginsan

Blue #2

ZDP-189

Molybdenum Vanadium

Super Blue

VS-1 / Chromax



Stainless-Clad Carbon-Core Knife Lines

White Steel core

Blue Steel core

Super Blue core

Yuki

Fujimoto

Shiso

Maboroshi

Tantakatan

Nashiji

Koishi

Denka

Takeda

Mugen

Zero

 

This chart shows the level of edge retention, the rustiness and the brittleness (represented by the size of the bubble). I hope it helps the visual folks out there

I hope this helps you get comfortable with the different steel types, their strengths and their weaknesses. If you feel like you want to go deeper down the rabbit hole, check out our boom The Knifenerd Guide to Japanese Knives or read our blog Knife Knowledge Basics: Knife Steel. If you still feel like you need help picking a knife, contacts us and we'll be happy to guide you through the process!

Start Shopping!

Mike Wrinch
Mike Wrinch

Mike was a chef for 15 years and and has been a knife aficionado for most of them. His love of Japanese knives began, coincidentally, when Knifewear began. Mike decided that it was time to get out from behind the stoves and hanging out at Knifewear wasn’t paying the bills so he hired himself. We rehabilitated him into a life of knives and shaving in 2012. He loves to talk about food and cooking as well as knives. Mike is the General Manager of all our shops.



Also in Knife Knowledge 101

Japanese Kitchen Knife Care
Japanese Kitchen Knife Care

September 11, 2020 2 min read 0 Comments

Read More
Wabi-sabi and the Impermanence of 'New'
Wabi-sabi and the Impermanence of 'New'

February 18, 2020 3 min read 0 Comments

Read More
The Truth About Damascus Steel
The Truth About Damascus Steel

January 28, 2020 5 min read 0 Comments

Read More

Subscribe