1 1

Kyohei Shindo Aogami Kurouchi Nakiri 165mm

Kyohei Shindo Aogami Kurouchi Nakiri 165mm

$150.00 CAD
$150.00 CAD
Sale Sold out
Shipping calculated at checkout.

***The handle in this line has changed recently. The collar is now made of black pakka. We will be updating the photo when we get more stock in

About Kyohei Shindo - Shindo san is a young blacksmith out of Tosa. He is originally from Hokkaido and went to university in Okinawa. He had always wanted to become a craftsman and found the blacksmithing was the craft for him. Tosa was the place where the image of the blacksmith matched to the image he had about it so he moved to Tosa. He had hard time but in May of 2020, he finally started his own workshop after practicing for 8 years.

About the Shape - Underutilized in the western kitchen, the nakiri’s flat blade is meant for the push/pull chopping of vegetables. Since the entire flat edge of the knife touches the cutting board at once, you won't be turning the vegetable into an 'accordion', pieces that are still connected by a thread after you've cut them. The added weight of the blade allows it to fall through food more easily while you chop, so the knife does more of the work for you! How great is that?

Shape Nakiri
Blade Length 165 mm
Steel Type Aogami #2 (Blue Carbon Steel) With Carbon Steel Cladding
Rust Prone ⓘ This knife can rust, click to learn more.
Rockwell Hardness 62–63
Blacksmith Kyohei Shindo
Edge/Bevel Double (50/50)
Handle Wa (Japanese) Handle - Oval Cherrywood Black Pakkawood Collar
Made in Tosa, Kochi, Japan

A note about measurements: Handmade Japanese knives can vary in their dimensions, so these measurements are only an example.

Knife Care

A NOTE ABOUT RUST  

Carbon steel is an awesome material to make knives out of. It’s easy to get sharp and stays sharp a very long time. But this comes with a trade-off; It will rust if you let it. To  avoid “bad” rust (orange rust) Wipe the knife dry with a dry cloth after use. Over time, the  blade will begin to protect itself with an oxide layer (grey to dark grey “good” rust),  this will slow the reaction time but not inhibit the rust entirely. Maintain the good  habit of drying off your knife.  

USE  

• Only cut food you can bite through with this knife. Hard foods can chip the blade. No olive pits, bones,  lobster shells, woody stems or parmesan rinds. Cutting frozen food is especially bad  because the cold will make hard steel even more brittle. If you wouldn’t chew it with  your own teeth, don’t cut it.  

• Your cutting surface is the biggest culprit of dulling your knife. Use wood. End  grain wood is especially good. Plastic can be fine too, but certainly not glass,  granite or bamboo. 

• The edge of your knife works best sliding forwards or backwards. Scraping the  knife edge sideways will dull or damage the edge. Instead, use the spine of the knife to move foods across the cutting board. Do not twist the edge or pry with the edge, this is the worst screwdriver you ever bought and these motions will certainly  damage the edge. Listen to the knife! If you can hear the edge making a “tink”  sound on the cutting board, change what you are doing.  

CLEANING  

• After use, wash the knife by hand with regular dish soap, rinse with hot water  and dry by hand immediately. Dishwashers are very bad for knives.  

• Wood handles may dry out over time and exposure to water. Simply treat them  with some food safe mineral oil or beeswax.  

• If you see orange rust, remove it. The scrubby side of a sponge can do the trick.  If it’s still not coming off try baking soda and water mixed into a paste or a product  called Barkeeper’s Friend.  

STORING  

• Protect the edge; for your safety and to avoid edge damage. A simple blade cover  will do the trick if you keep knives in a drawer or travel case. 

• A convenient wall magnet made with wood is a great way to show off your knives.  Be sure to put it back spine first, then roll it onto the blade face. This will keep the  edge from contacting the wood first.  

• The good-ol’ counter top block can keep knives at the ready and protected. So can  drawer inserts. Whatever the method, keep the edge from touching anything else. 

Shipping and Returns

We aim to ship your order within 1 business day at Knifewear, if there is a hold up, we'll aim to let you know and give you a timeline.

We offer $3 shipping on orders over $100* anywhere in Canada and $200* to customers in the USA. We ship worldwide, and offer up to the minute rates from our shipping partner DHL.

*Konro Grills and some other larger items are excluded from the free shipping offer.

How do I make a return on an online order?
No worries, we've got you sorted. Head over to https://knifewear.com/returns and follow the prompts. 

Can I pick up my order Curbside / At the store?
Absolutely, as long as all the items you are looking for are in stock at the location you want to pickup from, you'll be able to select that at the checkout. If one or more items aren't at your preferred location we are happy to ship it to you. 

View full details

Recently Viewed